Sharp EL-5160S, Operation Manual

Page: 120 / 188

E-9
DRILL mode:
b 2
Used to practice math and multiplication table drills.
CPLX mode:
b 3
Used to perform complex number calculations.
MATRIX mode:
b 4
Used to perform matrix calculations.
LIST mode:
b 5
Used to perform list calculations.
EQUATION mode:
b 6
Used to solve equations.
SET UP Menu
Press
@ J
to
display the SET UP menu.
Press
j
to exit the SET
UP menu.
Determination of the angular unit
The following three angular units (degrees, radians, and
grads) can be specifi ed.
DEG (°):
@ J 0 0
(default)
RAD (rad):
@ J 0 1
GRAD (g):
@ J 0 2
Selecting the display notation and decimal places
Five display notation systems are used to display
calculation results: Two settings of Floating point (NORM1
and NORM2), Fixed decimal point (FIX), Scientifi c
notation (SCI), and Engineering notation (ENG).
• When
@
J
1 0
(FIX) or
@
J
1
2
(ENG) is pressed, “TAB(0–9)?” will be displayed
and the number of decimal places (TAB) can be set to
any value between 0 and 9.
• When
@ J 1 1
(SCI) is pressed,
“SIG(0–9)?” will be displayed and the number of
signifi cant digits can be set to any value between 0
and 9. Entering 0 will set a 10-digit display.