background image

Page 3 of 7

water tank, and then wipe the surface with a damp cloth, now you

can boil water to serve.

NOTE

: -

T

he max capacity of

is 2.0L.Do not over the max level, 

- Kindly use only filtered water or mineral water for boiling. Using tap water is

not advisable.

OPERATION OF YOUR INSTANT BOILER

1. To fill the

remove it from the power base and open the lid by pressing

lid release button, fill the body with the desired amount of water, and then close the

lid. The wa

level must be within the Min and the Max level. Too little water will

result in the

switching off before the water has boiled.

Note: Ensure that the lid is firmly in place before plugging into power outlet.

2. Position the

on the power base. Make sure it is positioned properly.

3. Place a suitable cup or container with a tea bag, coffee, sugar, etc. below the dispensing

nozzle. Never operate your

without a cup or suitable container placed

below th dispensing nozzle. Make sure it aligns with the spout.

Note: When choosing the size of cup, it is recommended the capacity of the cup

sh

be not less than 300ml, make sure the cup is positioned in place before using.

4. Set the dispense control to your desired setting. The lowest output on the minimum

position is about at 150ml and the highest output on the maximum position is about

300ml (the amount of water may be tolerance of +/-25ml). According to your need,

can set the desired water output.

5. Connect the plug into power outlet, press down the power button and the indicators in

the body will light up, then it will start to boil the water.

6. After a while, hot water will flow out from the dispensing nozzle. When desired water

quantity has been obtained, the power button will cut-off power automatically.

Bef

removing cup, make sure water is flowing out any more. You can stop the

wate

being dispensed by pressing stop button at any time.

Warning:

-

The water flowing out from dispensing nozzle is very hot, handle

carefu

and never touch it with hand to avoid scalding.

ter

e

all

at

you

ore

r that

lly

from nozzle even when boiler is not operating

remaining water in the

Instant Boiler

dispense 

Instant Boiler

Instant Boiler,

Instant Boiler

Instant Boiler

water will 

Summary of Contents for EK-A205-CS









Reviews: