Page 5 of 7
5. Press the power button again.
6. Discard the water.
Your
is now empty.
If your
will not be used for an extended period (e.g. if you are on
holiday),
recommend that you first empty it.
Before using your
again, carry out several boil cycles discarding the
water ea time.
REMOVAL OF MINERAL DEPOSITS
To maintain its performance, your
will require descaling once every three
months.
1. Completely remove the lid and fill your
to the MAX marking on
the water chamber and place an empty cup on the drip tray. Replace the lid. Select
a suitable setting for the dispensing control and press the start button. Wait for the
water to be dispensed into the cup.
2. Pour a citric acid-based (eg. Vinegar) proprietary descaling product to the hot water in
the cup and stir.
3. Tip the contents of the cup into your
and close the lid.
4. Place the empty cup on the drip tray and press the power button.
5. Wait for the water to be dispensed into the cup.
6. Discard the water from the cup.
7. Repeat steps 4, 5 and 6 until your
is empty. Fill your
with
fresh water to the MAX fill level and place an empty cup on the drip tray.
8. Press the power button and wait for the water to be dispensed into the cup.
9. Discard the water in the cup.
10. Repeat steps 8 and 9 until your
is min mark. This will rinse any
remaining descaling solution from your
11. Open the lid and empty any remaining water into sink.
we
ch
-
-
-
Instant Boiler
Instant Boiler
Instant Boiler
Instant Boiler
Instant Boiler
Instant Boiler
Instant Boiler
Instant Boiler
instant boiler
Instant Boiler
..
