Sharp DW-R268A, Operation Manual, Page: 15 / 40

DW-R249A_eng
How to Operate the Timer
To set on timer
E-13
It can be set only when the unit is shut down.
ス スイング
上 後 ワイド
TIMER ON
indicator
TIMER SETTING
indicator
TIMER SETTING
button
Pip
Lighting
To release timer operation, either press the TIMER button until the ON TIMER and TIMER SETTING indicators
go off or press the POWER ON/OFF button.
Caution
When the TANK FULL indicator blinks, empty the drain tank.
The operating mode can be changed even after ON TIMER operation has been selected.
To change the mode, press the respective operation button.
Example
If you set ON TIMER operation as Òafter 5 hoursÓ
Press the TIMER button.
The ON TIMER indicator, [ ] on the LED display and the
TIMER SETTING indicator light. At the same time, the
indicator for the previously selected mode lights.
When the POWER ON/OFF button is pressed after the
power plug has been plugged in, or when the POWER ON /
OFF button is pressed after a power outage, the unit is
preset to start operation in AUTO DEHUMIDIFY mode.
When the TIMER button is kept pressed, the indication on the
LED display changes automatically. While pressing the TIMER
button, the timer setting time changes as shown below in
1-hour increments. Select the setting time.
No indication
(set release)
Select the desired operating mode by pressing the AUTO DEHUMIDIFY button, CONTINUOUS
DEHUMIDIFY button or DRY CLOTHES button.
Select the desired operating mode.
When AUTO DEHUMIDIFY is selected, the DEHUMIDIFY mode can be changed by pressing the AUTO DEHUMIDIFY button.
When CONTINUOUS DEHUMIDIFY or DRY CLOTHES is selected, the air flow mode can be
selected with the respective selector button.
Pressing the WIDE SWING button lets you select the air flow direction from the WIDE SWING louver.
Pressing the PLASMACLUSTER button turns PLASMACLUSTER ION operation on and off.
The following settings can be changed as desired.
Canceling ON TIMER operation
( (
Lighting
E-9
page
E-10〜E-11
page
E-8
page
E-12
page
Confirm that the OPERATION indicator has gone out and operation has stopped.
The timer indication changes every hour from 5
→
4
→
3
→
2
→
1, and after 5 hours operation starts.
1
2
1
Changing
the
air
flow
direction
/How
to
Operate
the
Timer
ENGLISH