Sharp DW-R268A, Operation Manual, Page: 14 / 40

弱 弱 自動 結露防止 カビアタック 強 強 フルパワｰ
衣類乾燥 連続除湿 自動除湿 入/切
運 転
DW-R249A_eng
E-12
The WIDE SWING button allows you to select "Up", "Rear" or "Wide" for the air flow direction, or
stopping (Off) it at a desired angle.
Changing the air flow direction
By repeatedly pressing the WIDE SWING button, the position of the WIDE SWING louver can be changed in
the sequence shown below. To stop the WIDE SWING louver at a desired angle, press the button again (Off)
when the louver has reached the desired angle.
Press the WIDE SWING button during operation.
Pip
(Indication example)
AUTO DEHUMIDIFY
Operation in Wide Air Flow position
UP REAR WIDE
When operation stops, the WIDE SWING louver returns to "Close" position. To restart operation,
press the WIDE SWING button again and select the air flow direction.
Do not expose the WIDE SWING louver to impact or rotate it by force. Otherwise the louver may
be damaged.
After a change in air flow direction, the WIDE SWING louver is determining its position, so it may
take a few seconds until it starts moving.
Any object touching the WIDE SWING louver may cause the air flow direction to change. In this
case, set the air flow direction again with the WIDE SWING button.
The sound produced by the air flow changes with the air flow direction.
Caution
(OFF)
WIDE SWING louver
Lighting
WIDE SWING button