Sharp DW-R268A, Operation Manual, Page: 13 / 40

DW-R249A_eng
When operation stops, the WIDE SWING louver returns to "Close" position. Note that in stopped
condition, the humidity is not indicated.
* If the POWER ON/OFF button is pressed to restart the unit after a stop, the unit resumes
operation in the previous selected mode.
Stop
Press the POWER ON/OFF button again.
Press the POWER ON/OFF button.
Press the DRY CLOTHES button.
The OPERATION indicator lights and AUTO DEHUMIDIFY operation starts.
The "Low" indicator for DRY CLOTHES mode lights, and the unit starts DRY CLOTHES operation at "Low" air flow.
With the start of operation, the WIDE SWING louver rotates from "Close" to "Up" and stops in that position.
(Indication example) DRY CLOTHES mode, slightly high humidity, WIDE SWING louver in air flow direction "Up"
WIDE SWING button DRY CLOTHES button POWER ON/OFF button
Set the direction of the WIDE SWING louver.
Choose the optimum setting.
Changing the air flow rate
Press the DRY CLOTHES button again and select Air Flow mode.
The DRY CLOTHES Air Flow indicator lights and the air flow rate
changes in the sequence shown below.
Combining this with PLASMA CLUSTER ION (Clean) mode will deactivate the mold spores floating in
the air (see for CLUSTER ION effect) and help to make your clothes even cleaner.
E-11
･･･
Operation Procedure
DRY CLOTHES operation
Lighting Lighting Lighting
Lighting
Caution
In the cases below, the unit stops dehumidifying and blows air only.
Caution
At "High" air flow rate, your clothes will dry faster, but the unit will generate more noise.
When the room humidity is below 40% at temperatures over 35¡C
When the room humidity is less than 30% at temperatures more than 28¡C but less than 35¡C
E-12
page
E-5
page
E-9
page
OPERATION
indicator
Pip
Pip
2
Pip
1
2
3
Operation
Procedure
1 3
ENGLISH