Sharp DW-R268A, Operation Manual, Page: 11 / 40

DW-R249A_eng
Stop
When operation stops, the WIDE SWING louver returns to "Close" position. Note that in stopped
condition, the humidity is not indicated.
* If the POWER ON/OFF button is pressed to restart the unit after a stop, the unit resumes
operation in the previous selected mode.
Press the POWER ON/OFF button again.
Press the POWER ON/OFF button.
Press the AUTO DEHUMIDIFY button and select operation mode.
The OPERATION indicator lights and AUTO DEHUMIDIFY operation starts.
Operation mode is switched in order.
With the start of operation, the WIDE SWING louver rotates
from "Close" to "Up" and stops in that position.
Set the direction of the WIDE SWING louver.
Choose the optimum setting.
(Indication example) AUTO DEHUMIDIFY mode, slightly high humidity, WIDE SWING louver in air flow direction "Up".
AUTO
To prevent the formation of mold, use the unit in rooms where
mold tends to form such as rooms on the north side or store
rooms where people are normally not present.
When humidity drops to below 50%, the dehumidifying
operation stops and the unit changes to fan operation.
MOLD ATTACK
The unit stops dehumidifying and blows air only when
the humidity is about less than 60% at temperatures up
to 27¡C, and when the humidity is about less than 55%
at temperatures of 28¡C or higher. (Right figure)
However, depending on the room size and construction,
the unit may not stop dehumidifying.
PREVENT
CONDENSATION
DEHUMIDIFY operation is continuously carried out by
controlling the volume of air flow: ÒMediumÓ at temperature
of about 15¡C or more and ÒHIGHÓ at about 15¡C or less.
Caution
Under the following conditions, PREVENT CONDENSATION operation
will stop and the unit will change to fan operation. (See figure at right.)
The room temperature is 35¡C or more and humidity is less than 40%.
The room temperature is above 28¡C and less than 35¡C, and
humidity is less than 30%.
WIDE SWING button AUTO DEHUMIDIFY button POWER ON/OFF button
Operation Procedure
AUTO DEHUMIDIFY operation
WIDE SWING louver
Pip Pip
Pip
Lighting
Lighting
E-9
25
30 28 35
30
35
40
DEHUMIDIFY
operating range
55
27
Temperature ¡C
Humidity
%
Temperature ¡C
Humidity
%
28 29
60
65
DEHUMIDIFY AUTO
operating range
E-12
page
OPERATION
indicator
CLOSE UP
1
2
3
Preparations
Before
Using
/Operation
Procedure
Lighting
3
Lighting
2 1
ENGLISH