38
www.sharp.co.uk/support
All the information you need on the VCR status will be summarised on the on-screen display. If you are record-
ing, playing back a tape or watching a broadcast on the video channel, you can call up three standard on-
screen displays. The display can be selected by pressing
ON SCREEN
on the Remote, 1, 2, 3 or 4 times.
•
If the clock is not set, the time and date will not be displayed.
•
When tape playback mode,”channel”is not displayed
Each time
ON SCREEN
on the Remote is pressed, the display on the TV screen changes the mode in the
following sequence:
•
AUTO mode
....................
The current mode and channel number will be displayed for 3 seconds when
an operation or number button is pressed.
•
FULL mode
....................
All the active features will also be shown on screen.
•
Counter mode
................
This display will show the tape counter and amount of tape remaining.
•
OFF mode
......................
This will remove the display from the screen.
Each time
DISPLAY
on the Remote is pressed, the VCR Front Panel Display changes the mode in the following
sequence:
•
Clock mode
..................... The current time will be displayed.
•
Channel position mode
..The channel position will be displayed.
*1
•
Tape counter mode
.........The current tape position will be displayed.
•
Tape remain mode
.......... The amount of video tape remaining will be displayed.
•
The default time and date will not be displayed if the clock has not been set.
•
The VCR will return to Tape counter mode each time it is switched on.
•
If you are recording from this VCR to another, make sure you remove the display from the screen otherwise it will be
recorded.
•
When power ON, channel position is displayed.
•
Usually use the “channel position”.
VCR Display Information
AUTO mode
→
FULL mode
→
Counter mode
→
OFF mode
Clock mode
→
Channel position mode*1
→
Tape counter mode
→
Tape remain mode
1 CH59
SUPER P. ON NICAM
STEREO
SP L R
10:00AM REM 1:05
9/07 02 0:00.00
Programme number and channel
Tape Status
NICAM signal
Audio output mode
Tape speed
Tape remaining
Time
Date
Tape counter
VCR Reset
1
Select
VCR/DVD CHANGE Switch
to
VCR
.
2
Press
OPERATE
.
3
Press and hold
VCR MENU
and
CH
"
together on the Remote
Control for 10 seconds.
•
VCR reset is now complete.
*1 When in tape playback
mode, “channel” is not
displayed
DVNC65H028_038.pm6
30/8/02, 11:34 am
38
