Sharp DV-NC200SB, Service Manual

Page: 45 / 133

1-11-13
H9941TS
FLOW CHART NO.10
Video E-E does not appear.
Is the Video signal inputted to Pins(48,50,52,54) of
IC301?
1) In the external input mode
2) In the U/V tuner mode
Check the line between Pin(20) of JK1402
(Scart jack) and Pin(52) of IC301, and
service it if defective.
Check the line between Pin(20) of JK101
(Scart jack) and Pin(50) of IC301, and
service it if defective.
Check the line between the video input
terminal (front) and Pin(54) of IC301, and
service it if defective.
Check the line between Pin(24) of the U/V tuner
and Pin(48) of IC301, and service it if defective.
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes No
No
No
No
No
No
No
Is the C-SYNC signal outputted to Pin(67) of IC301?
Is the C-SYNC signal inputted to Pin(58) of IC501?
Is the video signal outputted to Pin(4) of IC751?
Is the "L" pulse inputted into Pins(9,10,11) of IC751?
Yes
Replace IC751.
Replace IC501.
Is approximately 5V voltage supplied to Pin(16)
of IC751, or approximately -6V voltage supplied to
Pin(7) of IC751?
Is 5V voltage supplied to Pins(18,24,42,55,72) of IC301?
Is the serial data and clock signal
supplied to Pins(68,69) of IC301?
Check the P-ON+5V line and AL+5V line,
and service it if defective.
No
Check the AL+5V line and the
AL-30V line (R764,D111), and service it if defective.
Check the line between Pin(67)
of IC301 and Pin(58) of IC501,
and service it if defective.
Check the line between Pins(68,69) of IC301
and Pins(71, 72) of IC501, and service it if
defective.
Check the line between Pin(4) of IC751
and Q104, and service it if defective.
Check the line between Pin(61) of IC301 and
Pin(5) of IC751, and service it if defective.
When only Line signal is not outputted...
check the line between the emitter of Q104 and the
video output terminal JK101 (Scart jack), and
service it if defective.
Is the video signal inputted into Pin(5) of IC751?
Is the video signal outputted to the emitter of Q104?
Replace IC301.