Sharp DV-NC200SB, Service Manual

Page: 24 / 133

1-7-1
H9941DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and dress
the cables as they were originally.
1
: Identification (location) No. of parts in the figures
2
: Name of the part
3
: Figure Number for reference
4
: Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or de-
soldered.
P=Spring, L=Locking Tab, S=Screw,
CN=Connector,
*=Unhook, Unlock, Release, Unplug, or Desolder
e.g. 5(S-1) = five Screws (S-1),
2(L-2) = two Locking Tabs (L-2)
5
: Refer to "Reference Notes."
2. Disassembly Method
[1] Top Case 1 8(S-1) -
[2] Front 2 *3(L-1), *3(L-2) 1
Assembly 1-1
1-2
[3] Top 2 3(S-2) -
Bracket
[4] DVD 3 4(S-3), *CN401, -
Mechanism *CN601
Assembly
[5] Partition 3 (S-4) -
Plate
[6] Power 3 2(S-5), *CN501 -
Supply CBA
[1] Top Case
[2] Front Assembly
[3] Top Bracket
[4] DVD Mechanism Assembly [8] DVD Main CBA Unit
[15] Jack-B CBA
[5] Partition Plate
[7] Loader Holder
[6] Power Supply CBA
[9] VCR Chassis Unit
[10] Deck Assembly
[11] DVD Open/Close CBA
[13] Main CBA
[12] Power SW CBA
[14] Jack-A CBA
[7] Loader 3 2(S-6) -
Holder
[8] DVD Main 4 2(S-7), *CN201, 2
CBA Unit *CN301 2-1
2-2
3
[9] VCR 5 5(S-8), 2(S-9), -
Chassis 2(S-10), (L-3)
Unit
[10] Deck 6 Desolder, 4,5
Assembly 2(S-11), (S-12)
[11] DVD 6 Desolder -
Open/Close
CBA
[12] Power SW 6 Desolder -
CBA
[13] Main CBA 6 ---------- -
[14] Jack-A CBA 6 Desolder, 2(S-13)
[15] Jack-B CBA 6 Jack Plate, 2(S-14)
(S-15), Desolder
↑ ↑ ↑ ↑ ↑
1 2 3 4 5
REMOVAL
ID/
LOC.
No.
Fig.
No.
REMOVE/
*UNHOOK/UNLOCK/
RELEASE/UNPLUG/
DESOLDER
Note
PART
REMOVAL
ID/
LOC.
No.
Fig.
No.
REMOVE/
*UNHOOK/UNLOCK/
RELEASE/UNPLUG/
DESOLDER
Note
PART