Sharp DV-NC200SB, Service Manual

Page: 29 / 133

1-8-1
H9945INT
To put the program back at the factory-default,
initialize the DVD player & VCR as the following
procedure.
[DVD section]
1. Press [DVD], [1], [2], [3], [4], and [DISPLAY] buttons
on the remote control unit in that order.
Fig. g appears on the screen.
MODEL : *******
Version : *.**
Region : *
EXIT: POWER EEPROM CLEAR : CLEAR
Fig. g
"*******" differ depending on the models.
2. Press [CLEAR/C-RESET] button on the remote con-
trol unit.
Fig. h appears on the screen.
MODEL : *******
Version : *.**
Region : *
EEPROM CLEAR : OK
EXIT: POWER EEPROM CLEAR : CLEAR
"*******" differ depending on the models.
Fig. h
When "OK" appears on the screen, the factory
default will be set.
3. To exit this mode, press [OPERATE] button.
HOW TO INITIALIZE THE DVD PLAYER & VCR