Sharp DV-NC100S, Service Manual

Page: 104 / 126

2-1-2
H9740MEN
Cleaning
Cleaning of Video Head
Clean the head with a head cleaning stick or chamois
cloth.
Procedure
1. Remove the top cabinet.
2. Put on a glove (thin type) to avoid touching the upper
and lower drum with your bare hand.
3. Put a few drops of 90% Isopropyl alcohol on the head
cleaning stick or on the chamois cloth and, by slightly
pressing it against the head tip, turn the upper drum
to the right and to the left.
Notes:
1. The video head surface is made of very hard material,
but since it is very thin, avoid cleaning it vertically.
2. Wait for the cleaned part to dry thoroughly before
operating the unit.
3. Do not reuse a stained head cleaning stick or a
stained chamois cloth.
Do Not !
Cleaning Stick
Upper
Cylinder
Video Head
Do Not touch
with your bare
hand!
Cleaning of ACE Head
Clean the head with a cotton swab.
Procedure
1. Remove the top cabinet.
2. Dip the cotton swab in 90% isopropyl alcohol and
clean the ACE Head. Be careful not to damage the
upper drum and other tape running parts.
Notes:
1. Avoid cleaning the ACE Head vertically.
2. Wait for the cleaned part to dry thoroughly before
operating the unit or damage may occur.
ACE Head