background image

45 

GB

Title Name and Chapter Mark Copied
during Dubbing

• Title name and chapter mark are as follows:

Dubbing (HDD/DVD)

Can dub.

— Cannot dub.
*1 Chapter mark of the dubbed title will not be copied

when you dub from HDD to DVD-RW/R (Video mode)
using rate conversion dubbing function. The chapters
will be inserted according to the setting of auto chapter
(either “10 min”, “15 min”, or “30 min”).

*2 You cannot dub from a finalized DVD-RW/R (Video

mode) to HDD.

*3 During dubbing from HDD to DVD-RW/R (Video mode)

maximum chapter marks that could be dubbed using
high speed dubbing is 99 per title.

• Thumbnail will not be dubbed.

High Speed Dubbing

Limitations on High Speed Dubbing when
Dubbing from HDD to DVD (Video Mode)

• During high speed dubbing, you cannot monitor the

programme being dubbed on the TV screen.

• If you stop high speed dubbing in the middle of process

the recorded title might be erased.

• You cannot high speed dub from a play list.

“HIGH SPEED DUBBING PRIORITY” (page 

89

)

• This function enables high-speed dubbing in both Video

mode and VR mode.

• If a title is recorded with “HI SP DUB PRIORITY” set to

“NO”, you cannot perform high-speed dubbing in Video
mode. Use “RATE CONVERSION DUBBING” (page 

46

).

(This setting is unnecessary when performing high speed
dubbing into VR mode.)

• Cancel “HIGH SPEED DUBBING PRIORITY” when you

want to edit frames of programmes recorded to HDD
using “HIGH SPEED DUBBING PRIORITY”. You can edit
the frames after the cancellation.

• You cannot set “HIGH SPEED DUBBING PRIORITY” again

to the programme that cancelled “HIGH SPEED DUBBING
PRIORITY” once.

• You cannot record 16:9 and 4:3 screen size images in one

title.

• The Recorder continues to dub the title in same screen

size when it started dubbing even in case the screen size
of title changed in the middle.

HDD

DVD (Video mode)

Title Name

DVD (Video mode)

HDD

Chapter

Mark

*1

HDD

DVD (VR mode)

• When you record a programme with bilingual broadcast

with “HI SP DUB PRIORITY” set to “YES”, either “L CH” or
“R CH” audio is recorded. See page 

93

 for details.

• When recording 16:9 size image in LP, EP, or MN1-17

recording modes, the image will be recorded as 4:3
(squeezed).

Rate Conversion Dubbing

Limitation of Rate Conversion Dubbing

• “DOLBY VIRTUAL SURROUND” (page 

62

) will be set to

“OFF” when rate conversion dubbing is used.

• “DD OUTPUT LEVEL” (page 

88

) is set to “NO” when rate

conversion dubbing is used.

• The image might look longer vertically when you dub 16:9

image from HDD to DVD-RW/R (Video mode) using rate
conversion dubbing. In such case, adjust TV setting to
correct the playback image.

• Chapter marks might shift slightly when dubbed using

rate conversion dubbing.

Dubbing from HDD to DVD

Limitation when Dubbing from HDD to DVD-
RW/R (Video Mode)

You cannot dub from HDD to DVD-RW/R in following cases:
• Total number of titles in DVD-RW/R reached 99 or total

number of chapters reached 999.

• HDD or DVD-RW/R is either recording or playing back.

Dubbing from DVD to HDD

You cannot dub from DVD-RW/R to HDD in
following cases:

• Not enough HDD capacity. (When there is not enough

capacity in HDD, the Recorder will continue the dubbing
until there is no more capacity.)

• Total number of titles in HDD reached 199 or total number

of chapters reached 999.

• HDD or DVD-RW/R is either recording or playing back.
• When you try to do this, dubbing will be suspended.

When you dub a title that has both “Copy Once” and
“Copy Freely” enabled programmes, only the “Copy
Freely” enabled programme will be dubbed.

• You cannot dub a “Copy Once” enabled programme

recorded on a DVD-RW to the HDD.

Dubbing from DVD to HDD

• You can only dub programmes of DVD-RW/R (VR mode)

to HDD. You cannot dub a disc that used another
recorder.

• You cannot dub a DVD-RW/R (Video mode) disc recorded

with this Recorder after it has been finalized.
If you cancel the finalization in DVD-RW (Video mode)
disc, you can dub programmes.

Rate Conversion Dubbing

HDD

DVD (Video mode)

Title Name

Chapter

Mark

*3

HDD

DVD (VR mode)

High Speed Dubbing

*2

DV-HR350F-044-049

04.3.1, 4:22 PM

45

Summary of Contents for DV-HR300F














































































































Reviews: