background image

GB

ENGLISH

SAFETY INFORMATION

Power Cord Protection

To avoid any malfunctions of the Recorder, and to
protect against electric shock, fire or personal injury,
please observe the following.
• Hold the plug firmly when connecting or

disconnecting the AC power cord.

• Keep the AC power cord away from heating

appliances.

• Never put any heavy object on the AC power cord.
• Do not attempt to repair or reconstruct the AC power

cord in any way.

• This Recorder is classified as a CLASS 1 LASER

product.

• The CLASS 1 LASER PRODUCT label is located on

the rear cover.

• This product contains a low power laser device. To

ensure continued safety do not remove any cover or
attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.

Note:

This Recorder can be used only where the power
supply is AC 220V-240V, 50Hz. It cannot be used
elsewhere.

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.

AS THE LASER BEAM USED IN THIS RECORDER
IS HARMFUL TO THE EYES, DO NOT ATTEMPT
TO DISASSEMBLE THE CABINET. REFER
SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.

Laser Diode Properties

Material: DVD: 

AlGaInP

CD: 

GaAlAs

Wave length: DVD: 

658nm

CD: 

784nm

Emission Duration: 

Pulse

Laser output: Max. DVD: 

100mW

CD: 

255mW

OPERATION MANUAL 

ENGLISH

DV-HR350F-001-012

04.3.1, 4:19 PM

1

Summary of Contents for DV-HR300F














































































































Reviews: