Sharp DK-UH2, Operation Manual

Page: 31 / 33

E-20
ENGLISH
DK-UH2
DK-UH2(BK)
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
(*) This power consumption value is obtained when the
(*) demonstration mode is cancelled in the power stand-by mode.
(*) Refer to page 6 to cancel the demonstration mode.
USB
Power source DC IN 6V 2A: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
Power
consumption Power on : 5 W
Power stand-by: 0.3 W(*)
Output power RMS: 3.8 W (1.9 W + 1.9 W) (DIN 45 324)
Speaker 1-way type speaker system
Speakers: 5 cm (2") - 6 ohms - Full Range
Speaker maximum
input power 3.8 W/Channel
Speaker rated
input power 1.9 W/Channel
Input terminals Auxiliary (audio signal):
500 mV/47 k ohms
Dimensions Width: 380 mm (15")
Height: 157 mm (6-2/5")
Depth: 221 mm (8-7/10")
Weight 1.2 kg (2.65 lbs)
USB host interface Complies with USB 1.1/2.0 (Full Speed)
Mass-Storage-Class.
Support Bulk only and CBI protocol.
Support File MPEG 1 Layer 3
WMA (Non DRM)
Bitrate support MP3 (32 - 320 kbps)
WMA (64 - 192 kbps)
Other Maximum total number of MP3/WMA files is
40 000.
Maximum total number of folders is 200
INCLUSIVE of root directory. (Folders which
have non playable files also counted.)
The ID3TAG information supported are
TITLE, ARTIST and ALBUM only.
Support ID3TAG version 1 and version 2.
File system
support Support USB devices with Microsoft
Windows/DOS/FAT 12/FAT 16/FAT 32.
2 kbyte block length for sector.