Sharp DK-UH2, Operation Manual

Page: 17 / 33

E-6
ENGLISH
DK-UH2
DK-UH2(BK)
Preparation for Use
Power source
Using with the AC/DC adaptor
Notes:
Unplug the AC/DC adaptor from the wall socket if the unit will not
be used for a prolonged period of time.
Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
Demonstration mode
The first time the unit is plugged in, the unit will enter the
demonstration mode. You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by
mode (demonstration mode), press the
E SOUND/DEMO button on main unit or
remote control. The demonstration
mode will be cancelled and the display
will be disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the E SOUND/
DEMO button on main unit or remote control again.
Notes:
When the power is on, the E SOUND/DEMO button can be used
to select the E SOUND mode.
The E SOUND/DEMO button does not function during timer
stand-by. Cancel the timer if you want to enter the demonstration
mode.
Make sure to unplug the AC power lead before making any
connections.
1
Plug the AC power lead into the AC/DC adaptor.
2
Plug the AC/DC adaptor cable into the DC INPUT socket on
the unit.
3
Plug the AC power lead and switch on the power supply.
The display indicator lights up when the AC power is
applied. The POWER indicator will turn BLUE when the
system is “ON”.
DC IN 6V
AUX IN
DC IN 6V
AUX IN
DC INPUT Socket
AC/DC Adaptor Cable
2
(DC 6V)
AC/DC Adaptor
AC Power Lead
Wall Socket
1
3
(AC 100 - 240 V~ 50/60 Hz)
FU NC TIO N C LO C K
S LEEP TI M ER
SN OOZE/
DI MM ER
VOL
M E M ORY DI S PLAY
PLAY
M ODE
E S OU N D
/DE M O
FOLDER
E S OU N D
/DE M O