25
DK-A10P
DK-A10P (BK)
Radio
Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
Note:
The backup function protects the memorized stations for a few days
should there be a power failure or the AC power cord becomes
disconnected.
To recall a memorized station
To scan the preset stations
The stations saved in memory can be scanned automatically.
(Preset memory scan)
To erase entire preset memory
1
Perform steps 1 - 3 in “Tuning” on page 24.
2
Press the MEMORY button to enter the preset tuning
saving mode.
3
Within 1 minute, press the
or
button to select the
preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 1 minute, press the MEMORY button to store that
station in memory.
If the preset number indicators disappear before the station is
memorized, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorized for that preset channel number will be erased.
Press the
or
button for less than 0.5 seconds to select the
desired station.
1
Press the
or
button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the
or
button again when the desired station is
located.
1
Press and hold the CLEAR button for more than 3 seconds.
“TUN CLEAR” will be displayed.
2
Within 10 seconds, press the MEMORY button.
“COMPLETE” will be displayed.
