19
DK-A10P
DK-A10P (BK)
CD or MP3/WMA disc Playback
Playback will begin from track 1.
After the last track on the disc is played, the unit will stop automatically.
Caution:
Do not play discs of special shapes (heart, octagon, etc). It may cause
malfunctions.
Do not push the disc while it is moving.
If the power fails while the disc is moving, wait until the power is restored.
If TV or radio interference occurs during CD operation, move the unit
away from the TV or radio.
Various disc functions
Notes for CD or MP3/WMA disc:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Insert the disc into the disc slot, label side up
The disc must be fully inserted into the disc slot before playing. If
“NO DISC” appears due to improper disc insertion, switch off the
AC power supply and then switch it on again.
8 cm disc can be inserted without an adaptor.
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20 to
90 seconds).
4
Press the
/
button to start playback.
To remove the disc:
In the stop mode, press the
button.
5" (12 cm)
3" (8 cm)
Total number of
tracks on the disc
Total playing
time of the disc
Total number
of files
Disc Name
[CD]
[MP3/WMA]
Disc play indicator
Function
Main unit
Remote
control
Operation
Play
Press in the stop mode.
Stop
Press in the playback mode.
Pause
Press in the playback mode.
Press the /
button to
resume playback from the
paused point.
Track up/
Track
down
Press in the playback or stop
mode.
If you press the button in the
stop mode, press the /
button to start the desired track.
Press and hold down in stop
mode, the track will up/down
rapidly as figure below.
Example: Current track no.65
Down: 65 –> 64 –> 63 –> 62 –>
61 –> 60 –> 50 –> 40
Up: 65 –> 66 –> 67 –> 68 –> 69
–> 70 –> 80 –> 90
Note: This operation is invalid if
total track is less than 20.
Fast
forward/
Fast
reverse
Press and hold down in the
playback mode.
Release the button to
resume playback.
When the end of the last track is reached during fast forward, “END”
will appear on the display and CD operation will be paused. When the
beginning of the first track is reached during fast reverse, the unit will
enter the playback mode.
Rewritable multi-session discs with unfinished writing, can still be
played.
