manualshive.com logo in svg

Sharp DC500 - B/W Laser - All-in-One, Networking Manual, Page: 184 / 248

Share
Download
Sharp DC500 - B/W Laser - All-in-One Networking Manual Download Page 184

Entering and Using Programs

182

Serial Polling

(Continued from 

Initial procedure.)

Polling

(Continued from 

Initial procedure.)

14

Dial the machine to be polled using one of the following methods:

•

Press a Rapid Key.

•

Press 

 and enter a Speed Dial number (if you enter less than 3 

digits, press 

 to complete the entry).

•

Enter a full fax number with the numeric keys. 

15

Press  

.

16

Press 

 repeatedly until you return to the date and time display.

SPEED DIAL

START/
ENTER

START/
ENTER

STOP

14

Dial the machines to be polled using one or more of the following 

methods:

•

Press one or more Rapid Keys.

•

Enter one or more Speed Dial numbers, pressing 

 before each 

number. (If you enter less than 3 digits for a Speed Dial number, press 

 to complete the entry.)

•

Enter one or more full fax numbers with the numeric keys, pressing 

 

after each full number.

•

Press one or more Group Keys.

SPEED DIAL

START/
ENTER

START/
ENTER

all.book  Page 182  Thursday, May 13, 2004  8:51 AM

Summary of Contents for DC500 - B/W Laser - All-in-One

























































































































































































































































Reviews:

No comments