Sharp DC500 - B/W Laser - All-in-One Networking Manual Download Page 130

Page: 130 / 248

Installing the Printer Driver

128

Windows NT Server

The first step is to install Microsoft TCP/IP Printing. Click the Windows

Start

button, point to

Settings

, and then click on

Control Panel

In the Control Panel window, double-click

Network

to open the Network

window. Click the

Services

tab. If “Microsoft TCP/IP Printing” already

appears in the list, close the Network window and go to Step 6. If “Microsoft
TCP/IP Printing” does not appear, click the

Add

button.

The “Select Network Service” window shows a list of services. Select

“Microsoft TCP/TP Printing”, and click the

button.

all.book Page 128 Thursday, May 13, 2004 8:51 AM

Summary of Contents for DC500 - B/W Laser - All-in-One

























































































































































































































































Search results

Summary of Contents for DC500 - B/W Laser - All-in-One

Reviews:

Sharp DC500 - B/W Laser - All-in-One, Networking Manual, Page: 130 / 248

Search results

Summary of Contents for DC500 - B/W Laser - All-in-One

Reviews: