Sharp DC500 - B/W Laser - All-in-One Networking Manual Download Page 175

Page: 175 / 248

Timer Operations

173

6. Special

Functions

Confidential transmission

(Continued from

Initial procedure.)

Enter the mailbox number (2 digits). (Go directly to Step 9 if the

receiving machine does not have mailboxes.)

Press

Dial the receiving machine using one of the following methods:

•

Press a Rapid Key.

•

Press

and enter a Speed Dial number (if you enter less than 3

digits, press

to complete the entry).

•

Enter a full fax number with the numeric keys.

Press .

Press

and/or

to adjust the resolution and contrast if

desired, and then press

Load the document and then press

•

The document will be scanned into memory.

START/
ENTER

SPEED DIAL

START/
ENTER

RESOLUTION

CONTRAST

START/
ENTER

all.book Page 173 Thursday, May 13, 2004 8:51 AM

Summary of Contents for DC500 - B/W Laser - All-in-One

























































































































































































































































Search results

Summary of Contents for DC500 - B/W Laser - All-in-One

Reviews:

Sharp DC500 - B/W Laser - All-in-One, Networking Manual, Page: 175 / 248

Search results

Summary of Contents for DC500 - B/W Laser - All-in-One

Reviews: