background image

1

  Press the MEGA COOL button during cooling 

mode.

•  The remote control will display " 

   " .

•  The temperature display will go off.

•  The green MEGA COOL lamp on the unit will light.

TO CANCEL

Press the MEGA COOL button again.

•  MEGA COOL operation is also cancelled when the 

mode is changed, or when the unit is turned off.

•  The green MEGA COOL lamp on the unit will turn 

off.

MEGA COOL OPERATION 

In this operation, the air conditioner fan works at extra high speed with a setting 

temperature of 59°F.

1

E-28

NOTES:

•  You cannot set the temperature or fan speed during MEGA COOL operation.

•  The fan returns to the HIGH speed setting after the unit has run for 30 minutes in MEGA 

COOL mode. 

•  The extra high fan speed may automatically slow down to protect the unit.

1

When SLEEP operation is set, the temperature setting is automatically adjusted to 

prevent the room from becoming too cold.

SLEEP OPERATION

1

  Press  the  SLEEP  button  during  cooling 

mode.

•  The remote control displays “

 ”. 

•  The orange TIMER lamp on the unit will light.

•  The unit will stop operating after 8 hours.

•  The fan speed setting is set to AUTO.

TO CANCEL

Press the SLEEP button.

•  The orange TIMER lamp on the unit will turn off.

•  SLEEP operation is also cancelled when the mode 

is changed, or when the unit is turned off.

Start of

SLEEP operation

Unit shuts off

2˚F

2˚F

1hour

8hours

1hour

NOTES:

•  One  hour  after  the  SLEEP  operation  is  started,  the 

temperature  setting  rises  by  2˚F  and  after  another  

hour it rises by an additional 2˚F. Temperature display 

on the remote control will not change from its original 

setting.

•  SLEEP  operation  and  MEGA  COOL  operation  can 

not be used together.

•  The OFF TIMER, ON TIMER and SLEEP operation 

can not be set together.

  Only the most recent settings will be used.

CV-P13PX_eng.indd   30

09.1.26   3:36:29 PM

Summary of Contents for CV-2P13SX



































Reviews: