04/3/19
XL-DV50H(H)_E.fm
E-15
ENGLISH
TINSZA007SJZZ
XL-DV50H
Prep
aration f
o
r Us
e
System connections (continued)
!
Connecting the AC power lead
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket. If you plug in the unit
first, the unit will enter the demonstration mode.
Notes:
"
Never use a power lead other than the one supplied. Otherwise, a
malfunction or an accident may occur.
"
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
!
Demonstration mode
!
To turn the power on
Cooling fan:
A cooling fan is built into this unit for better heat radiation. Do not
cover the opening in this section with any obstacles to avoid dam-
age to the unit.
Wall socket
(AC 230 V, 50 Hz)
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration
mode:
When the unit is in the power stand-
by mode (demonstration mode),
press the X-BASS/DEMO button.
The unit will enter the low power
consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to se-
lect the extra bass mode.
Press the ON/STAND-BY but-
ton to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
Downloaded from:
