SYMPTOM
POSSIBLE CAUSE
REMEDY
●
No surround effect is obtained.
●
Is the BYPASS mode selected?
●
Are the headphones plugged in?
●
Select any surround mode except
BYPASS.
●
When the headphones are plugged
in, the surround mode will be can-
celled.
●
No picture is seen on the TV.
●
Is the correct function selected?
●
Select the correct function.
(No video signal is output except
when DVD 1, VCR 1, DVD 2 or VCR
2 is selected.)
●
The remote control does not func-
tion or does not operate properly.
●
The batteries (polarity) are not in-
serted properly.
●
The batteries in the remote control
are dead.
●
The remote control is being operated
from an incorrect distance or angle.
●
Insert the batteries properly.
●
Replace the batteries.
●
Operate it within a range of 0.2 m
(8") to 6 m (20’) and within an angle
of 15˚ to either side of centre.
●
The power cannot be turned on from
the remote control.
●
Is the AC power lead plugged in?
●
Connect the AC power lead.
●
"PROTECT" appears in the display,
and no sound is heard.
●
Is the speaker wire shorted?
●
Was the unit used at high volume
for many hours?
●
Plug in the speaker wire properly.
●
Set the unit in the stand-by mode
and wait for a while.
●
No sound is heard from the sub
woofer.
●
Were the headphones plugged in
and then unplugged?
●
When the headphones are plugged
in, the sub woofer is cancelled. After
pulling out the headphone plug, if
sound can’t be heard from the sub
woofer, press the equalizer button
(or set the unit in the stand-by mode
and then turn it back on, or change
the surround mode).
(Continued)
TAPE1
TAPE2
MAINTENANCE
■
Internal care
●
Dirty heads, capstans or pinch rollers can cause poor
sound and tape jams. Clean these parts with a cotton
swab moistened with commercial head/pinch roller cleaner
or isopropyl alcohol.
●
After long use, the deck’s heads and capstans may be-
come magnetised, causing poor sound. Demagnetise
these parts once every 30 hours of playing/recording time
by using a commercial tape head demagnetiser. Read the
demagnetiser’s instructions carefully before use.
■
External care
●
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then wipe with a dry cloth.
●
Do not use chemically treated cleaning cloths or other
chemicals.
CD-C491H(SUK) TINSE0229AWZZ
45
