Sharp ARFX13 - Fax Interface Card, Operation Manual

Page: 31 / 104

27
INITIAL SETTINGS
2
SELECTING THE RECEPTION MODE
Your machine has three modes for receiving incoming calls and faxes:
●
AUTO mode:
Select this mode when you only want to receive faxes on your telephone line. The machine will automatically
answer all calls and receive incoming faxes.
●
MAN. mode:
This is the most convenient mode for receiving phone calls if you have an extension phone. To have true manual
mode, the machine must be set to not answer while in MAN. mode (see "SETTING THE NUMBER OF RINGS
FOR MANUAL RECEPTION" (p.29)). You can also receive faxes; however, all calls must first be answered by
picking up the receiver on the extension phone.
●
A.M. mode:
Select this mode when an answering machine is connected to the machine and you want the answering machine
to answer all calls. This allows you to receive both voice messages and faxes while you are out.
To select the reception mode, press the [RECEPTION MODE] key until the desired reception mode appears in the
display.
For more information on reception modes, refer to "RECEIVING FAXES" (p.63)".
If you are using distinctive ringing as described in "DISTINCTIVE RINGING" on page 41, you must set the
reception mode to AUTO. This is true, as well, if you are using an answering machine with distinctive ringing (in
this case, the answering machine must be connected to a separate wall socket, not to your
machine
).
Note
The selected reception
mode appears.
05 NOV WED 08:20
STAND-BY AUTO 100%
!AR-FX13_sec.book 27 ページ ２００８年２月１日 金曜日 午後５時４０分