Sharp ARFX13 - Fax Interface Card Operation Manual Download | Manualshive

Page: 2 / 104

background image

Note

• This manual (fax function) describes the AR-M201 model with optional

reversing single pass feeder (RSPF) (AR-RP9), and optional facsimile
expansion kit (AR-FX13) installed. Depending on the model you have and
on the options installed, some of the illustrations in this manual may be
different, however, the basic operations are the same.

• This manual describes how to use the fax function of the machine.

Part names and functions shared with the copy function (for example, the
misfeed indicator and add paper indicator), are described in the Operation
Manual (for general information). For more information, please read the
Operation Manual (for general information).

• This operation manual refers to the Reversing Single Pass Feeder as the

"RSPF".

IMPORTANT NOTICE FOR AUSTRALIA AND NEW ZEALAND USERS

Your fax machine and the telephone system

WARNING NOTICE:
NO calls can be made to or from this fax during a mains power failure.

WARNING

— Australian Communications and Media Authority (ACMA) regulations

state that no unauthorised changes or modifications to this equipment are permitted.

Note: Complies with the following standards,

AS/NZS 60950.1
AS/ACIF S002, NZ TELECOM and CISPR 22

These limits are designed to provide reasonable protection against interference in
an installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause interference. However, there is no guarantee that interference will not occur
in a particular installation.

If this equipment does cause interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and the receiver.

— Connect the equipment to an outlet on a different circuit to that which the

receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

The Ringer Equivalence Number (REN) for this equipment is written on the A-Tick
label.

Important safety information

In Australia, installing or modifying telephone lines should only be done by an

ACMA licensed serviceman. In New Zealand, installing or modifying telephone

lines should be done in accordance with Telecom wiring practices.

Cover2.fm 1 ページ２００８年２月１２日　火曜日　午後２時５４分

«
1
2
3
4
...
»

Summary of Contents for ARFX13 - Fax Interface Card









































































































Reviews:

No comments

Related manuals for ARFX13 - Fax Interface Card

Brand: VASTEX Pages: 15

Brand: Easymount Pages: 2

Brand: Magicard Pages: 6

Brand: Baintech Pages: 7

Brand: Baicheng Innovations Pages: 32

Brand: IBAIONDO Pages: 7

Brand: Oki Pages: 56

Brand: Oki Pages: 8

Brand: Oki Pages: 36

Brand: Oki Pages: 150

Brand: Oki Pages: 28

C9600hnColorSignage

Brand: Oki Pages: 20

C9600hnColorSignage

Brand: Oki Pages: 125

Brand: Oki Pages: 20

Brand: Oki Pages: 205

Brand: Oki Pages: 51

Brand: Oki Pages: 47

Brand: Oki Pages: 49

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands