Sharp ARFX13 - Fax Interface Card Page 16 Operation Manual Download | Manualshive

Page: 16 / 104

background image

12

FINAL PREPARATIONS

Operation Manual (for general information)

Explains the machine and how to use it as a copier. Also explains how to install the software that allows the machine
to be used as a printer and scanner for your computer.

The following information is contained in the operation manual for the machine :

Online Manual (on the CD-ROM)

This manual explains the procedures for using the machine as a printer and a scanner.

CONNECTING OTHER DEVICES

If desired, an answering machine or external telephone can be connected to the machine through the telephone
socket, labeled "TEL," on the rear of the machine.

●

Connecting an answering machine to the machine allows you to receive both voice and fax messages when you
are out. To use this feature, first change the outgoing message of your answering machine, and then set the
reception mode of the machine to "A.M." (Answering Machine mode) when you go out.

Comments:

1. It is advisable to keep the length of the message under 10 seconds. If it is too long, you may have difficulty

receiving faxes sent by automatic dialing.

2. Your callers can even leave a voice message and send a fax message on the same call. Modify your outgoing

message to explain that this can be done by pressing their [START] key (

) after leaving their voice message.

●

You can connect an extension phone to the machine to make and receive calls like any other extension phone on
your line. Even if you pick up the extension phone and hear a fax tone, the machine will automatically cut in and
take over the line. Note, however, if you also have a PC modem on the same line, you must turn on the Remote
Reception function, and deactivate the Fax Signal Receive function. See "SETTING UP THE MACHINE FOR
USE WITH A PC MODEM" (p.38) and "USING THE REMOTE RECEPTION FUNCTION" (p.39).

OPERATION MANUAL contents

Page

CAUTIONS

3

PART NAMES

9

POWER ON AND OFF

12

LOADING THE PAPER TRAY

15

BYPASS FEED (including special paper)

17

OPERATION MANUAL contents

Page

CHANGING A TRAY'S PAPER SIZE
SETTING

19

MISFEED REMOVAL

70

TONER CARTRIDGE REPLACEMENT

74

CHECKING THE TOTAL COUNT

77

CLEANING THE MACHINE

78

If you are using distinctive ringing with an answering machine, you do not need to follow the procedure described
below. (Please note that when distinctive ringing is used, the answering machine must be distinctive ring
compatible.)

Note

The Remote Reception function is initially set to "ON".

Note

!AR-FX13_sec.book 12 ページ２００８年２月１日　金曜日　午後５時４０分

«
...
14
15
16
17
18
...
»

Summary of Contents for ARFX13 - Fax Interface Card









































































































Reviews:

No comments

Related manuals for ARFX13 - Fax Interface Card

GFS 10 - Fuel Sensor

Brand: Garmin Pages: 2

Brand: Parrot Pages: 19

Brand: Parrot Pages: 88

Brand: Parrot Pages: 2

Brand: Parrot Pages: 2

Brand: Parrot Pages: 11

CK 3000 Evolution

Brand: Parrot Pages: 8

CK 3000 Evolution

Brand: Parrot Pages: 106

Brand: PASCO Pages: 6

Brand: PASCO Pages: 4

CK 3000 Evolution

Brand: Parrot Pages: 2

Brand: Targus Pages: 4

Brand: Targus Pages: 2

Brand: Tarot Pages: 5

Brand: Waterpik Pages: 2

imageCLASS MF269dw

Brand: Canon Pages: 32

Brand: Samsung Pages: 158

Brand: Canon Pages: 598

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands