Sharp AR-NS1, Operation Manual

Page: 24 / 48

Chapter 3 Using the Network Scanner
20
3
Setting the Desired Scan Size of Original:
The scan size of the original can also be set. For example, when using an A4 (8-1/2” x 11”)
original, a different area size such as B5 (7-1/4” x 10-1/2”) can be scanned. To set the scan
size, select a preset size in the AB or INCH tab, or enter a free size by selecting the CUSTOM
tab.
4
Touch the OK key.
NOTE
To cancel scan size, touch the AUTO key of SCAN AREA SELECTION. Afterwards, the scan size setting
is cancelled and the automatic size detection function is activated.
When selecting the preset sizes in the AB or INCH tab,
touch the AB or INCH tab to select the desired size key.
When entering free size, touch the CUSTOM tab and
then X and Y keys adjusting each size by using
and keys respectively.
The limit figures to be entered in the X and Y fields
are as follows:
X Y
AB System
10 – 432mm 10 –297mm
INCH
System 1/2” – 17” 1/2” – 11-5/8”