manualshive.com logo in svg

Sharp AR-M355U, Quick Reference Manual, Page: 21 / 33

Share
Download
Sharp AR-M355U Quick Reference Manual Download Page 21

Quick Reference Guide: AR-M355U/M455U

Cautions for Servicing & Prohibited Printing List

Cautions for Servicing

□

Do not touch the photoconductive drum.  Scratches or 
smudges on the drum will cause dirty printouts.

□

  The fusing unit is extremely hot.  Exercise care in this area.

21

□

Do not look directly at the light source of the scanner 
module. Doing so may damage your eyes.

□

  Five adjusters are provided on all optional stand/paper 

drawer u nits.  These adjusters should be lowered until they 
contact the floor.

□

Do not make any modifications to this machine.  Doing so 
may result in personal injury or damage to the machine.

□

  Since this machine is heavy, it is recommended that it be 

moved by more than one person to prevent injury.

□

When connecting this machine to a computer, be sure to first 
turn both the computer and the machine off.

□

  Do not throw toner or a toner cartridge into fire.  Toner may 

be spattered, causing a burn.

□

Store toner or toner cartridges in a hard-to-reach place for 
child safety.

□

Do not print anything that is prohibited from printing by 
law.  

The following items are normally prohibited from printing 
by national law.  Other items may be prohibited by local 
law.

Prohibited from Printing by Law

•

Money

•

Stamps

•

Bonds

•

Stocks

•

Bank drafts

•

Checks

•

Passports

•

Driver’s licenses  

Summary of Contents for AR-M355U


































Reviews:

No comments