Sharp AR-M160, Manual

Page: 104 / 151

AR-M205 SIMULATIONS 7-16
48 01 Main scanning/sub scanning
direction magnification ratio
adjustment Used to adjust the magnification ratio in the main scanning direction (front/rear) and the sub
scanning direction.
Enter the adjustment value with the 10-key and press the [START] key, and the entered value is
saved a copy is made.
(When the set value is increased by 1, the magnification ratio is increased by 0.1 %.)
(Adjustment range: 1 ~ 99, Default: 50)
05 SPF/RSPF mode sub scanning
magnification ratio adjustment in
copying The current SPF/RSPF mode sub scan direction magnification ratio adjustment value is displayed.
When the [START] key is pressed, the entered value is acquired and saved into the EEPROM, and a
copy is made. When the [CA] key is pressed instead, the simulation mode is terminated.
In RSPF adjustment, after the machine enters the copy mode of one page, select the single copy
mode with the duplex key to shift to the single copy mode, making two pages of single copy.
For printing, regardless of the density mode LED and the density level LED display, the density mode
= MANUAL, and density level = 3.
49 01 Flash ROM program writing mode (Operating procedure)
When this simulation is executed, "d" is displayed on the copy quantity display and the machine
enters the Flash ROM program writing mode. Use the writing tool on the PC to write the program.
During writing, the display is made as follows. After completion of downloading, turn OFF/ON the
power to reset.
* "*" in the error display indicates the error position.
Main
code Sub
code
Contents Details of operation
Lighting lamp Adjustment mode
TEXT lamp
PHOTO lamp Main scanning direction magnification ratio adjustment
Sub scanning direction magnification ratio adjustment
Lighting lamp Adjustment mode
AE lamp
TEXT lamp SPF/RSPF document surface magnification ratio adjustment
RSPF document back magnification ratio adjustment
Status Copy quantity display Pre-heat lamp Ready lamp
Download data reception
Data delete start
Data writing (Boot section)
Data writing (Program section)
Sum check
Completion of downloading
Error status "d"
"d"
"d"
"d"
"d"
"OFF"
"*E" ON
ON
Flash
Flash
ON
OFF
OFF OFF
ON
OFF
Flash
ON
OFF
OFF
1. Data reception error
2. Loader function transfer
3. Flash ROM delete
4. Flash ROM writing (Boot section) 5. Flash ROM writing (Program section)
6. Sum check (Loader section)
7. Sum check (Boot section)
8. Sum check (Program section)