Sharp AR-FX7, Operation Manual

Page: 101 / 116

99
KEY OPERATOR PROGRAMS
8
SPEAKER VOLUME SETTING
This setting is used to adjust the volume of the
following four types of sounds heard through the
speaker.
• SPEAKER • LINE MONITOR
• RINGER VOLUME • TRANSMISSION COMPLETE SOUND
To change a volume setting, touch the desired volume
key.
TRANSMISSION COMPLETE SOUND
SETTING
This program is used to select the beep pattern that
signals the end of transmission or reception. Touch
[PATTERN 1], [PATTERN 2], or [PATTERN 3].
To listen to beep pattern, touch the [CHECK] key.
TRANSMISSION COMPLETE SOUND
TIME SETTING
This program is used to select the length of the beep
that signals the end of transmission or reception.
Selections are [2.0 sec], [2.5 sec], [3.0 sec], [3.5 sec],
and [4.0 sec].
ACTIVITY REPORT PRINT SELECT
SETTING
This setting is used to have an activity report
automatically printed at regular intervals.
To have the report automatically printed every 50
transactions (transmissions and receptions), select the
[AUTO PRINT AT MEMORY FULL] checkbox. To have
the report automatically printed at a specified time each
day (only once a day), check the [PRINT DAILY AT
DESIGNATED TIME] box and then select the time with
the [HOUR] and [MINUTE] keys that appear.
Touch the [HOUR] key and then set the hour by touching
the
and keys. Set the minute in the same way.
[AUTO PRINT AT MEMORY FULL] and [PRINT
DAILY AT DESIGNATED TIME] can be
simultaneously selected.
TRANSACTION REPORT PRINT
SELECT SETTING
This setting is used to select the conditions for printing
out Transaction Reports. Conditions can be selected
for regular transmissions, broadcast transmissions,
receptions, and confidential receptions.
Touch the key to display the next setting. Select the
print conditions for receptions and confidential receptions.
KEY OPERATOR PROGRAMS
VOLUME ADJUSTMENT
SPEAKER
RINGER VOLUME
LINE MONITOR
OK
Low Medium High Off
KEY OPERATOR PROGRAMS
ACTIVITY REPORT PRINT SELECT SETTING
AUTO PRINT AT MEMORY FULL
PRINT DAILY AT DESIGNATED TIME
OK
PM
AM
HOUR MINUTE
13 01
• If you only select the PRINT DAILY AT
DESIGNATED TIME setting and the
number of recorded transactions exceeds
50 before the specified time, each new
transaction will delete the oldest
transaction (the oldest transaction will not
be printed).
• The activity report can also be printed out
on demand. ("PRINTING REPORTS"
(p.86))
Note
KEY OPERATOR PROGRAMS
TRANSACTION REPORT PRINT SELECT SETTING
PRINT OUT ALL REPORT
SINGLE SENDING
PRINT OUT ERROR REPORT ONLY
NO PRINTED REPORT
PRINT OUT ALL REPORT
BROADCASTING
PRINT OUT ERROR REPORT ONLY
NO PRINTED REPORT
OK
1/2
KEY OPERATOR PROGRAMS
TRANSACTION REPORT PRINT SELECT SETTING
PRINT OUT ALL REPORT
RECEIVING
PRINT OUT ERROR REPORT ONLY
NO PRINTED REPORT
PRINT OUT NOTICE PAGE
CONFIDENTIAL RECEPTION
NO PRINTED REPORT
OK
2/2