STORING, EDITING, AND DELETING AUTO DIAL KEYS AND PROGRAMS
6-4
10
If you need to enter a sub-address, touch
the [SUB ADDRESS] key and then enter
the sub-address with the numeric keys.
When you touch the
[SUB ADDRESS] key, a
slash is entered after the
fax number. Continue by
entering the sub-
address (max. 20 digits).
If you do not wish to
enter a passcode,
proceed to step 12.
11
If you wish to enter a passcode, touch the
[SUB ADDRESS] key once again and enter
the passcode with the numeric keys.
When you touch the
[SUB ADDRESS] key, a
slash is entered after the
sub-address. Continue
by entering the
passcode (max. 20
digits).
12
Touch the [OK] key.
You will return to the one-touch key programming
screen. "REGISTRATION IS COMPLETED" will
appear highlighted to the right of "No.".
13
Check the key name.
The characters appearing next to the [KEY NAME]
key will be displayed in the key. Only the first 18
characters of the name entered in step 1 will be
displayed. If you need to change the name that will
be displayed in the key, touch the [KEY NAME]
key.
If you do not wish to
change the name, this
step is not necessary.
Refer to page 6-15 for
the procedure for
entering characters.
14
Check the transmission settings.
The initial transmission settings are "TRANSMISSION
SPEED: 33.6 kbps" and "INTERNATIONAL
CORRESPONDENCE MODE: NONE". To change
either of the settings, touch the [MODE] key.
If you do not wish to
change the settings, this
step is not necessary.
After touching the [MODE]
key, you can change either
of the two settings. When
finished, touch the [OK] key.
Transmission speed
Speed selections are 33.6 kbps, 14.4 kbps, 9.6
kbps, and 4.8 kbps. The higher the number, the
faster the transmission speed.
International correspondence mode
Selections are NONE, MODE 1, MODE 2, and
MODE 3.
15
When you have finished programming the
one-touch key, touch the [EXIT] key.
If you wish to program another one-touch
key, touch the [NEXT] key.
Touching the [EXIT] key
returns you to the screen
of step 4 on page 6-2.
Touching the [NEXT]
key returns you to the
screen of step 1 on
page 6-3.
NOTE
The "FAX No." line only shows 32 digits, regardless
of how many digits actually programmed.
N PRESS [OK].
OK
CANCEL
PAUSE
SUB ADDRESS
No. VIA THE 10-KEY PAD, THEN PRESS [OK
0666211221/3456/
NAME
SHARP CORPORATION
INDEX
USER 3
FAX No.
KEY NAME
SHARP CORPORATION
REGISTRATION IS COMPLETED.
NOTE
Set the transmission speed only when you know
what speed is most suitable, such as when you are
sending a fax to a foreign country and telephone line
conditions are bad. If you do not know the line
condition, do not change this setting.
NOTES
●
When sending a fax to a foreign country,
telephone line conditions can sometimes distort
the fax or interrupt the transmission. Selecting the
right international correspondence mode can help
alleviate these problems.
●
If errors frequently occur when sending a fax to a
foreign country, try each of modes 1 to 3 and select
the mode that enables the best transmission.
RATION
INITIAL
0666211221/3456/987654
FAX No.
RATION
33.6 kbps/NONE
MODE
S
INITIAL
NEXT
EXIT
0666211221/3456/987654
.
33.6 kbps/NONE
MODE
WhaleII_fax_ex.book 4
ページ
２００４年９月２１日 火曜日 午後１時９分
