Sharp AR-FN3, Service Manual

Page: 38 / 54

D. Expansion I/O: M66500FP (IC11) terminal signals
Pin
No.
Port
Signal
name
IN/OUT ACTIVE Specifications Remarks
1 PF6 PDCL/ OUT L Paddler clutch drive signal (On at L)
2 PF7 STORCL/ OUT L Paper discharge roller pressure release clutch (On at L)
3 VCC VCC Power supply (
+
5V)
4 PE0 EMA OUT H Elevator motor CW drive signal
5 PE1 EMB OUT H Elevator motor CCW drive signal
6 PE2 N.C
7 PE3 N.C
8 PE4 STMA OUT H Staple motor CW drive signal
9 PE5 STMB OUT H Staple motor CCW drive signal
10 PE6 N.C
11 PE7 N.C
12 GND GND Power supply (GND)
13 PB0 STID/ IN L Staple tray paper entry sensor signal (On at L)
14 PB1 STPD/ IN L Staple tray paper sensor signal (On at L)
15 PB2 T1PF/ IN L Tray 1 paper full sensor signal (On at L)
16 PB3 STID IN L Staple tray paper entry sensor 2 signal (ON at L)
17 PB4 T3UP IN H Tray 3 upper limit sensor signal (On at H)
18 PB5 T3DN IN H Tray 3 lower limit sensor signal (On at H)
19 PB6 LSTS/ IN L Stapler needle sensor signal (presence of needle at L)
20 PB7 NCTS/ IN L Stapler cartridge sensor signal (presence of cartridge at L)
21 PA7 T3OD/ IN L Tray 3 paper discharge sensor signal (On at L)
22 PA6 PFD4/ IN L Transport sensor signal 4 (On at L)
23 PA5 PFD3/ IN L Transport sensor signal 3 (On at L)
24 PA4 PFD2/ IN L Transport sensor signal 2 (On at L)
25 PA3 N.C
26 PA2 N.C
27 PA1 T3PDHP/ IN L Paper discharge paddler home position sensor signal (L: HP)
28 PA0 INPD/ IN L Paper entry sensor signal (On at L)
29 VCC VCC Power supply (
+
5V)
30 /RD RD/ IN L Data read signal (read at L)
31 /WR WR/ IN L Data write signal (write at L)
32 /CS CS/ IN L Chip select signal (select at L)
33 RESET RESET IN H Reset signal (reset at H)
34 GND GND Power supply (GND)
35 A2 A2 IN Address signal (A2)
36 A1 A1 IN Address signal (A1)
37 A0 A0 IN Address signal (A0)
38 D0 D0 IN/OUT Data signal (D0)
39 D1 D1 IN/OUT Data signal (D1)
40 D2 D2 IN/OUT Data signal (D2)
41 D3 D3 IN/OUT Data signal (D3)
42 D4 D4 IN/OUT Data signal (D4)
43 D5 D5 IN/OUT Data signal (D5)
44 D6 D6 IN/OUT Data signal (D6)
45 D7 D7 IN/OUT Data signal (D7)
46 PC7 STPDSL OUT H Paddler solenoid in staple tray (H: ON)
47 PC6 OG2SL OUT H Paper discharge gate 2 solenoid (On at H)
48 PC5 T3PDSL OUT H Paper exit paddler solenoid (H: ON)
49 PC4 N.C
50 PC0 JMA OUT H Jogger motor drive signal A
51 PC1 JMA/ OUT H Jogger motor drive signal /A
52 PC2 JMB OUT H Jogger motor drive signal B
53 PC3 JMB/ OUT H Jogger motor drive signal /B
54 PG0 PWD IN H Power supply shut-off monitoring signal (power shut-off at H)
55 PG1 DSW1 IN H Connection to copier detection signal (disconnection at H)
56 PG2 DSW2 IN H Upper door opening and closing detection signal (door open at H)
57 PG3 DSW3 IN H Front door opening and closing detection signal (door open at H)
58 GND GND Power supply (GND)
59 PF0 N.C
60 PF1 N.C
61 PF2 OG1SL/ OUT L Paper discharge gate 1 solenoid drive signal (On at L)
62 PF3 OG3SL/ OUT L Paper discharge gate 3 solenoid drive signal (On at L)
63 PF4 N.C
64 PF5 T30RCL/ OUT L Tray 3 high speed clutch drive signal (On at L)
AR-FN3
8/19/1999 9 – 5