2
2-60 Introduction to Command WorkStation and Command WorkSta-
tion LE
Sharp AR-C360P EFI Job Management Guide - 60
Fold the page exactly in half horizontally, unfold it, and then fold it
in half vertically. When you unfold the sheet again, you will see
that the fold lines cross three scales on three sides of the page.
Determine which number on the scale each fold line crosses.
8. In the Enter alignment values section, enter the value where the
fold crosses each of the three scales, marked A, B, and C, for Side
1. If you choose to align for duplex printing, enter the values for
the three scales on Side 2 of the page, as well.
Note:
If you enter different values in A and C, the image will
rotate, leading to uneven areas on printed output. If this occurs,
enter the same value in A and C.
9. When you have entered all of the alignment values, click Apply,
and then click Check Alignment to print the new alignment page.
10. To remove the alignments, select a tray and click Defaults in the
Enter alignment values section.
11. Click Done.
Summary of Contents for AR-C360P
Page 1: ......
