manualshive.com logo in svg

Sharp AR-C360P, Job Management Manual

Share
Download
Sharp AR-C360P Job Management Manual Download Page 179

7

7-179 Fiery Spooler for Mac OS computers

Sharp AR-C360P EFI Job Management Guide - 179

Fiery Spooler for Mac OS computers

For Mac OS, the Fiery Spooler interface is almost identical to that 
of Fiery WebSpooler (see 

“Connecting to a different Fiery from 

Fiery Spooler”

 on page 7-180). 

Starting Fiery Spooler

Use the following procedure to start Fiery Spooler.

To start Fiery Spooler on a Mac OS computer

1. Double-click the Fiery Spooler icon.

2. Select the Fiery in the Chooser window.

For information on setting up the connection to the server, see the 

User Software Installation Guide

 Chapter 2

.

3. Click OK.

4. Log in to the Fiery.

• To log in as Administrator, enter the Administrator password and 

click OK.

• To log in as Operator, enter the Operator password and click OK.

• To log in as Guest, click OK without entering a password.
The Fiery Spooler main window appears.

Summary of Contents for AR-C360P





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands