C
C-211 Troubleshooting
Sharp AR-C360P EFI Job Management Guide - 211
If you have configured the Fiery and set up client computers and
network servers according to guidelines in the
User Software Installation Guide
, try printing a Test
Page (in Command WorkStation or Command WorkStation LE,
choose Print Pages from the Server menu).
If you can print the Test Page but still cannot print a document
from a remote computer, contact the system administrator to
troubleshoot the network connection.
If you are unable to connect, and you
cannot
print the Test Page,
check the Sharp AR-C360P control panel display.
Setup error messages
For information on Setup error messages, see Appendix A of the
Configuration Guide.
If this happens
Try this
The printer is not in
Standby mode.
The printer’s Automatic Power-Off function
may have shut down the printer.
Turn the printer on, and then try printing a Test
Page again when the printer has warmed up.
You still cannot print
a
Test Page.
Make a copy. If you can make a copy, restart
the Fiery, and when you see Ready to Print on
the Sharp AR-C360P control panel display, try
printing a Test Page again. If the Test Page still
fails to print, contact your Sharp dealer.
Summary of Contents for AR-C360P
Page 1: ......
