manualshive.com logo in svg

Sharp AR-C360P, Job Management Manual

Share
Download
Sharp AR-C360P Job Management Manual Download Page 59

2

2-59 Preparing to work with Command WorkStation or Command 

WorkStation LE

Sharp AR-C360P EFI Job Management Guide - 59

3. Choose the tray you want to align from the Tray menu.

4. Choose the paper size loaded in the tray from the Media menu.

Note:

The Tray Alignment is specific to the combination of tray and 

paper size specified. If you align a given tray with Letter paper, 
and load Legal paper in that tray, the alignment will be invalid. 
You must perform a new Paper Tray Alignment for each 
combination of tray and paper size.

5. In the Print Alignment Page section, select the Print Duplex 

option to print a duplex page, or clear the option to print a 
simplex page.

6. Click Print to print the alignment page.

7. Once the page has printed, follow the directions on the alignment 

page.

Summary of Contents for AR-C360P





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands