1-5
CHAPTER
1
POWER ON AND OFF
The power switch is located on the left side of the copier. When the
power switch is turned to the “ON” position, the message “
WARMING
UP. PLEASE WAIT.
” will appear in the message display. Warming
up takes about 330 seconds. Once the copier is ready, the message
display will change to “
READY TO COPY.
”, and the START key
indicators will light up, indicating that copying is possible.
If the copier has been programmed in the auditing mode, the message
“
ENTER YOUR ACCOUNT NUMBER. -----
” will appear after warming
up. Once a valid account number has been entered, copying will
become possible.
GETTING STARTED
Power on and off
Power off
Power on
●
Be sure to extend the tray when paper sizes 8-1/2"
x 14" or larger are to be received.