Sharp AR-C160 Operation Manual Download

Page: 128 / 148

7-10

CHAPTER

20-BIN STAPLE SORTER (AR-SS2)

Remove the rear paper and tape from the cartridge.

●

Pull them straight. If they are pulled obliquely, the tape may be
torn.

Insert the staple box into the stapler until it clicks in
place.

Close the stapler cover.

Place a sheet of paper into the top bin. Press the manual
staple (

) key on the staple sorter when it lights up.

●

Check to see whether the sheet is stapled.
If it is not stapled, press the manual staple key again.

●

If the stapler does not operate properly even after
replacement, a staple may be jammed in it. See next page.

●

Staples for the staple sorter are available from your Sharp
dealer.

OPTIONAL EQUIPMENT

20-bin staple sorter (AR-SS2)

Summary of Contents for AR-C160





















































































































































Search results

Summary of Contents for AR-C160

Reviews:

Related manuals for AR-C160

Brands by name

Popular brands

Sharp AR-C160, Operation Manual

Search results

Summary of Contents for AR-C160

Reviews:

Related manuals for AR-C160

Brands by name

Popular brands