manualshive.com logo in svg

Sharp AR-BC320, Operation Manual, Page: 2 / 140

Share
Download
Sharp AR-BC320 Operation Manual Download Page 2

Warranty

While every effort has been made to make this document as accurate and helpful as possible, SHARP Corporation
makes no warranty of any kind with regard to its content. All information included herein is subject to change without
notice. SHARP is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this
operation manual. 

©

Copyright SHARP Corporation 2004. All rights reserved. Reproduction, adaptation or translation without prior
written permission is prohibited, except as allowed under copyright laws.

The power switch positions are marked " I " to indicate power "ON" and "

" to indicate stand-by.

In the stand-by position, power is being supplied to a drying heater within the optical system of the copier.

Caution:

For complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and shall be easily accessible.

FOR YOUR RECORDS ...

To protect against loss or theft, record and retain for reference the machine’s serial number located on the back
of the unit.

Model Number                        AR-BC320                                                    

Serial Number                                                                                             

Date of Purchase                                                                                             

Place of Purchase                                                                                             

Authorized Sharp Copier/Printer                                                                                             

Service Department Number                                                                                             

This operation manual is also used for the AR-BC320 J.

WhaleII_general-copy_SEC.book  1 

ページ

  

２００４年９月１４日　火曜日　午前１１時４５分

Summary of Contents for AR-BC320













































































































































Reviews:

No comments