background image

AR-5316/5320 SIMULATIONS 7-5

51

02

Resist amount adjustment 

Used to adjust the contact pressure of the machine resist roller and the RSPF resist roller onto the 
paper. 
(Operating procedure)
When this simulation is executed, the current set value is displayed. 
When the exposure mode key is pressed, the following set items are changed sequentially. Enter an 
adjustment value with the 10-key and press the [START] key, and the entered value will be saved and 
a copy will be made. (Adjustment range: 1 ~ 99, Default: 50)
When the [CA] key is pressed, the entered value is saved and the simulation is terminated. 

Supported for the installed models only. Skipped for the models without installation.

53

10

SPF scan position change-over 
setting

Used to change over the scan position depending on that the SPF unit and the SPF document glass 
holder section are of anti-dirt glass or not. 
When this simulation is executed, the currently set code number is displayed. 
Enter the code number corresponding to the SPF unit to be used and press [START] key, and the 
setting will be changed over.

Though this setting is changed, the other set values are not affected. (The other set values remain 
unchanged.)
When replacing and installing the SPF unit, it is recommendable to use this simulation to set the 
scan position and execute the scan position automatic adjustment. 

64

01

Self print

The optical system status is ignored and a self print is made. Also when a print command is sent 
from the host, printing is performed. 

(Operating procedure)

When this simulation is executed, warm-up is performed and the ready lamp is lighted. 
(However, the scanner is invalid and no initial operation is made.)
Enter the code number with the 10-key, and select a cassette with the cassette select key and press 
the [START] key. The selected cassette start paper feed and printing is performed in the selected 
pattern.

*

Only the tray lamp and the online lamp are lighted, and no other lamps are lighted. 

Printing is made in 1 by 2 mode, where one line is printed and the following two liens are not printed, 
or in the grid pattern. 

*

Input disable for 4 ~ 99

*

Print data are made on A3 size. (A3 paper is preferable.)

Main 
code

Sub 

code

Contents

Details of operation

Lighting lamp

Adjustment mode

AE, Main cassette lamp
AE, 2nd cassette lamp
AE, Manual paper feed lamp
AE, TEXT, PHOTO lamps

Main cassette paper feed

2nd cassette paper feed

Manual paper feed

SPF document feed (Front surface)

Code No.

Mode

0

Set to the scan position of the current mass production SPF unit. (Default)

1

Set to the scan position of the ant-dirt SPF unit. 

Code number

Pattern

0
1
2
3

1 by 2
Grid pattern
White paper
Black background

[07]SIMULATIONS.fm  5 ページ  2003年12月19日 金曜日 午後3時26分

Summary of Contents for AR-5320




















Reviews: