4-6
CHAPTER
4
4
Place the new toner cartridge with the tabs in the
notches as shown.
5
Slide the toner cartridge along the guides over the toner
hopper.
6
Hold the toner cartridge with one hand while pulling on
the sealing tape to remove it.
7
Tap on the top of the toner cartridge 5 times to start the
flow of toner into the toner hopper.
●
If the toner cartridge was sufficiently shaken as described in
step 3, it will take about 50 seconds for the cartridge to empty.
Do not remove the cartridge until it is empty. If not empty, tap on
the top of the cartridge again until empty.
8
Slide the empty toner cartridge back along the guides
and remove it.
●
The cartridge opening will be closed as it is moved back along
the guides.
9
Slide the toner hopper into the copier and return the
toner hopper lock lever into place.
10
Close the front cover.
NOTE:
Add only one cartridge of toner.
ADDING TONER
SUPPLIES
Adding toner
Sealing tape
Summary of Contents for AR-280
Page 14: ......
Page 110: ......
Page 166: ......
Page 168: ...AR 280 AR 285 AR 335 PRINTED IN JAPAN 98F KS TINSE1697FCZZ SHARP CORPORATION ...