Sharp AR-250, Service Manual

Page: 102 / 196

22 - 5
Purpose Others
Function
(Purpose) Used to check the ROM version of each unit (section).
Item Software
Operation/
Procedure The ROM version of each section can be checked.
If there is any problem in the software, check the ROM
version of each section with this simulation and replace
with a new version if necessary.
22 - 6
Purpose Operation data output/Check (Display/Print)
Function
(Purpose) Used to output the list of the setting and adjustment
data (simulations, FAX soft switch, counters).
Item Data Adjust/Setting data
Operation/
Procedure When installing or servicing, execute this simulation to
print and store the adjustment values and setting data
for use in the next servicing. (Memory trouble, PWB re-
placement, etc.)
In this case, the print conditions can be set optionally.
1. Select the setup item.
(The selected item is highlighted.)
2. Set the item and conditions with the 10-key pad.
3. Press the [EXECUTE] key to print various data.
(AR-250/280/281/285/286//335/336/405/501/505)
A: Print out items (Contents)
1: All adjustment values and setup data
2:
All counter data
3: FAX soft switch setup data (Japan only)
4: Print density adjustment data
5: Adjustment and setup data of the other simulations
B: Paper feed mode
1: Manual paper feed
2: Upper paper feed tray
3: Lower paper feed tray
4: Desk upper paper feed tray
5: Desk middle paper feed tray
6: Desk lower paper feed tray
7: Large capacity paper feed tray
(AR-287/337/407/507)
A: Paper feed mode
1: Manual paper feed
2: Upper paper feed tray
3: Lower paper feed tray
4: Desk upper paper feed tray
5: Desk middle paper feed tray
6: Desk lower paper feed tray
7: Large capacity paper feed tray
22 - 7
Purpose User data output/Check (Display/Print)
Function
(Purpose) Used to display the key operator code. (This simulation
is used when the customer forgets the key operator
code.)
Item Data User data
Operation/
Procedure
nnnnn : Key operator code
22 - 8
Purpose Operation data output/Check (Display/Print)
Function
(Purpose) Used to check the number of use of the staple, the
ADF, RADF, SPF, and scanning.
Item Counter
Operation/
Procedure This data is used to check the use frequency of each
section. According to this data, maintenance is exe-
cuted.
nnnnnnnn : Counter value
22 - 9
Purpose Operation data output/Check (Display/Print)
Function
(Purpose) Used to check the number of use of each paper feed
section. (the number of prints)
Section Paper transport
Item Counter
7/13/2000 7 – 21