manualshive.com logo in svg

Sharp AR-250, Service Manual

The Sharp AR-250 is a multifunctional printer for professional use. With its high-quality output, it enhances productivity in any office setting. User convenience is ensured with the availability of the comprehensive Service Manual, freely downloadable from our website. Unlock the full potential of this remarkable product with our detailed manual.

Share
Download
background image

Code

Function (Purpose)

Main

Sub

44

15

Used to set the correction values of various parameters
(maincharger grid voltage, laser beam power, developing bias
voltage) in the image forming operation and image forming
section correction for OPC drum type A.
(AR-250/280/281/285/286/287/335/336/337/405/407)

46

2

Used to adjust the copy density in the copy mode
(binary/multi-value - auto, character and photo, photo mode). 
(The overall print density in each mode (all of the specified
density set for each density level (display value)) can be
adjusted in each mode.)

9

Used to adjust the print density for each density level (display
value) in the copy mode (binary - character mode). 

10

Used to adjust the print density for each density level (display
value) in the copy mode (binary - character, photo mode). 
An arbitrary print density can be set for each density level
(display value).

11

Used to adjust the print density for each density level (display
value) in the copy mode (binary -  photo mode). 
An arbitrary print density can be set for each density level
(display value).

17

Used to execute shading correction and display the correction
value.

18

Used to adjust 

g

 (density gradient) in each copy mode.

(AR-2X1/287/3X1/337/4XX/250/XX6/5XX series)

19

Used to adjust 

g

 (density gradient) and set the density

detection area in the auto copy mode and to set the image
process mode in the photo copy mode.
(AR-2X1/287/3X1/337/4XX/250/XX6/5XX series)

20

Used to adjust the copy density correction in the SPF copy
mode for the document table copy mode. Adjustment is made
so that the copy density is the same as that in the document
table copy mode. (AR-250/281/286/405/501/505/507 series)

48

1

Used to adjust the copy magnification ratio (main scanning
direction, sub scanning direction).

50

1

Used to adjust the copy image position and the void area
(image loss) on the print paper in the copy mode. (The same
adjustment can be made with SIM 50-2 (simple method).)

2

Used to adjust the copy image position and the void area
(image loss) on the print paper in the copy mode. (Simple
adjustment)
(This simulation allows the same simulation with SIM 50-1
more simply. )

5

Used to adjust the print image position (top margin) on the
print paper in the print mode.

6

Used to adjust the copy lead edge. (RSPF) (AR-501/505/507)

7

Used to adjust the copy lead edge (simple method). (RSPF)
(AR-501/505/507)

10

Used to adjust the print image center position. (Adjustment
can be made for each paper feed section.)

12

Used to adjust the print image center position. (Adjustment
can be made for each document mode.)

26

Used to set the folding margin of center binding.

51

1

Used to adjust the OPC drum separation pawl ON timing.

2

Used to adjust the contact pressure of paper onto the resist
roller in each section (copier paper feed section, duplex paper
feed section, SPF paper feed section). 
(When the print image position varies greatly for the paper or
when a lot of paper jam troubles occur, the adjustment is
required.)

3

Used to set the clutch OFF time. (AR-507 Europe and U.K.
only)

8

Used to set Enable/Disable of the drum separation pawl drive
solenoid (PSPS) operation for each paper feed section
(Manual paper feed, cassette 1, cassette 2, duplex module,
desk cassette 1, desk cassette 2, desk cassette 3, LCC)
(AR-501/505/507)

52

1

Used to adjust the duplex print mode stacking capability.
(Used to adjust the stop position of the paper tray width
direction alignment plate in the duplex unit.  The adjustment
is executed by changing the width direction alignment plate
home position in the software.)

Code

Function (Purpose)

Main

Sub

53

1

Used to adjust the document stop position in each operation
mode of ADF/RADF. (Target model:
AR-250/280/285/335/405/407)

2

Used to adjust the optical sensor sensitivity in the
ADF/RADF/RSPF.

6

Used to adjust the RSPF width detection level.
(AR-501/505/507 only)

60

1

Used to check the operation (read/write) of ICU (DRAM).
(SIMM MEMORY/ONBOARD MEMORY)

61

1

Used to test the operation of the scanner (exposure) unit.

61

2

Used to adjust the scanner (exposure) laser power (absolute
value) in the copy mode.

4

Used to adjust the scanner (exposure) laser power (absolute
value) in the printer mode. (For Photoconductor type B)

62

1

Used to format the hard disk. (Models with the hard disk
installed only)

2

Used to check the operation (read/write) of the hard disk.
(Models with the hard disk installed only.) (Partial check)

3

Used to check the operation (read/write) of the hard disk.
(Only the models with a hard disk) (All area check)

63

1

Used to check the result of shading correction. (The shading
correction data are displayed.)

7

Used to adjust the white plate scanning start position in the
shading white correction. (AR-501/505/507 only)

64

1

Used to check the operation of the printer function (auto print
operation). (Print pattern, paper feed mode, print mode, the
number of sheets, and the density can be set to an arbitrary
value.)

65

1

Used to adjust the touch panel (LCD display) detecting
position.

2

Used to check the result of the touch panel (LCD display)
detecting position adjustment. (The coordinates are
displayed.)

67

1

Used to check the printer PWB memory operation
(read/write). (When replacing the PWB with a new one, this
check must be performed.)

2

Used to check the printer parallel I/F operation. (This
simulation is used only for production, and a special tool is
required. Not available in the market.)

3

Used to adjust the printer parallel I/F ACk signal width.

11

Used to set YES/NO of the printer parallel I/F SELECT IN
signal.

12

Used to write data into the printer flash memory.

13

Used to check the printer flash memory data.

14

Used to check the printer flash memory data writing and its
result.

15

Used to check the sum of the printer flash memory.

16

Used to check the operation of the network card.

17

Used to clear data in the NVRAM of the printer PWB (set to
the default). (Printer set data)

18

Used to clear the application data area of the Network
Scanner of the Flash ROM. (AR-287/337/407/507)

69

1

Used to check the input/output by connecting channels A and
B of SCSI with the SCSI cable.

7/13/2000

7 – 5

Summary of Contents for AR-250





































































































































































































Reviews:

No comments

Related manuals for AR-250

Canon 1510 Installation Procedure preview
1510
Brand: Canon Pages: 12
Canon iR1020 Series Quick Start Manual preview
iR1020 Series
Brand: Canon Pages: 62
Canon imageRUNNER C475iF III Faq Manual preview
imageRUNNER C475iF III
Brand: Canon Pages: 92
Canon C400D Specification preview
C400D
Brand: Canon Pages: 2
Canon AM1 Service Manual preview
AM1
Brand: Canon Pages: 59
Canon Image Runner iRC1028i User Manual preview
Image Runner iRC1028i
Brand: Canon Pages: 15
Canon AK1 Operation Manual preview
AK1
Brand: Canon Pages: 62
Canon 8461A062 Operator'S Manual preview
8461A062
Brand: Canon Pages: 60
Canon iR2000 Series Reference Manual preview
iR2000 Series
Brand: Canon Pages: 194
Canon AK1 Service Manual preview
AK1
Brand: Canon Pages: 70
Canon imageCLASS MPC200 Service Manual preview
imageCLASS MPC200
Brand: Canon Pages: 122
Canon NP6012 Service Manual preview
NP6012
Brand: Canon Pages: 253
Canon iR1020 Series Service Manual preview
iR1020 Series
Brand: Canon Pages: 304
Canon iR2000 Series Service Manual preview
iR2000 Series
Brand: Canon Pages: 738
Canon CLC 10 Service Manual preview
CLC 10
Brand: Canon Pages: 330
Canon iR2200 Series Service Manual preview
iR2200 Series
Brand: Canon Pages: 768
Canon iR105 Series Service Manual preview
iR105 Series
Brand: Canon Pages: 1029
Canon imagePRESS 1110 Service Manual preview
imagePRESS 1110
Brand: Canon Pages: 1603

Brands by name

Popular brands

Load more brands