Sharp AR-162S, Operation Manual

Page: 12 / 68

10
GETTING ST
AR
TED
LOADING COPY PAPER
To save space, this copier has been designed with an adjustable front-loading
tray, which is easily opened for paper loading. For best results, use only
SHARP recommended paper. (See page 49.)
The paper required (
) indicator will light up when there is no copy paper
in the selected paper feed station, or when the paper tray is not installed or
is improperly installed.
1
Gently lift and pull out the paper tray until it stops.
2
Push the pressure plate down until it locks in place.
3
Fan the copy paper and insert it into the tray. Make sure
the edges go under the corner hooks.
●
If you change to a different size of copy paper, the tray must be
adjusted. See the next page.
● Set the paper along the guides.
● The tray holds up to 250 sheets of 21 lb. bond paper.
Do not load paper above the maximum height line.
4
Push the paper tray firmly back into the copier.
Loading cop
y paper
Maximum height line
When the paper size is changed in the paper tray, the
size of the paper must be entered by steps 8 through 10
on page 12. If not, the edges of copies may become
smudged with toner. Also, the AUTO IMAGE feature will
not function properly.