Sharp AR-155 Operation Manual Download

Page: 6 / 56

Getting started

CAUTIONS

Follow the cautions below when using this copier.

●

The fusing area is hot. Exercise care in this area when removing misfed
paper.

●

Do not look directly at the light source. Doing so may damage your eyes.

●

Do not switch the copier rapidly on and off. After turning the copier off, wait
10 to 15 seconds before turning it back on.

●

Copier power must be turned off before installing any supplies.

●

Place the copier on a firm, level surface.

●

Do not install the copier in a humid or dusty location.

●

When the copier is not used for long time, for example for consecutive holidays,
turn the power switch off and remove the power cord from the outlet.

●

When moving the copier, be sure to turn the power switch off and remove the
power cord from the outlet.

●

Do not cover the copier with a dust cover, cloth or plastic film while the power
is on. Doing so may prevent heat radiation, damaging the copier.

Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.

Cautions on laser

Wave length

785 nm ±15 nm

Pulse times

(4.0 µs ±4 ns)/7 mm

Output power

0.25 mW - 0.50 mW

Summary of Contents for AR-155

























































Search results

Summary of Contents for AR-155

Reviews:

Related manuals for AR-155

Brands by name

Popular brands

Sharp AR-155, Operation Manual

Search results

Summary of Contents for AR-155

Reviews:

Related manuals for AR-155

Brands by name

Popular brands