28
4
Supplies and user maintenance
USER MAINTENANCE
Take the charger cleaner out by holding the tab.
Set the charger cleaner onto the right end of the transfer charger, gently slide the
cleaner to the left end, and then remove it. Repeat this operation two or three times.
Slide the charger cleaner from the right end to the left end along the groove of
the transfer charger. If the cleaner is stopped on the way, smudges on copies
may occur.
Return the charger cleaner to its original position. Close the side cover by pressing
the round projections near the side cover open button.
Turn the power switch on.
When copier is not in use
To prevent entry of dust and foreign matter, store the copier as follows.
Remove the power cord and secure the copier using tape (four locations).
Summary of Contents for AR-155
Page 53: ...MEMO ...
Page 54: ...MEMO ...
