Sharp Aquous 4T-B70CJ1U Operation Manual Download Page 67

Page: 67 / 100

Using LINK Operation

Link Operation Menu (Continue)

Show Start Menu

You can call up a setup menu from the connected LINK-
compatible equipment.

NOTE

• Depending on the status of the equipment (recording or in

standby mode, etc), the setup menu will not be displayed.

Change Audio Output Device

You can select to listen to the TV sound only from the LINK-

compatible audio system.

Audio Return Channel:

The sound from the TV speaker is

muted and only the sound from the LINK-compatible audio
system is audible.
• You can use

VOL+

and

MUTE

Built-in Speaker:

The sound is output from the TV speaker.

HDMI Device Selection

If multiple HDMI devices are connected in a daisy chain, you
can specify which device to control here.
Press / to select the desired device from a list of
connected HDMI devices, and then press

ENTER

HDMI CEC LINK

You can also display the HDMI CEC LINK screen from the
Link Operation Menu.

ENG 6-4

Page 1 of 1

sharp operation manual

2020/3/25

file:///E:/hejiaye/html/B123389-00_EN-FR-ES/Base%20data/HTML/eng/6-4.html?next

Summary of Contents for Aquous 4T-B70CJ1U





































































































Search results

Summary of Contents for Aquous 4T-B70CJ1U

Reviews:

Related manuals for Aquous 4T-B70CJ1U

Brands by name

Popular brands

Sharp Aquous 4T-B70CJ1U, Operation Manual

Search results

Summary of Contents for Aquous 4T-B70CJ1U

Reviews:

Related manuals for Aquous 4T-B70CJ1U

Brands by name

Popular brands