Sharp Aquous 4T-B70CJ1U Operation Manual Download Page 25

Page: 25 / 100

On-Screen Display Menu

About Menu Items

• Some menu items may not be displayed depending on the

selected input source.

NOTE

• The screens in the operation manual are for explanation

purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.

• The order of explanations for each menu item in the

following pages is not necessarily in accordance with the
alignment of the items on the screen.

LCFONT:

• This product is embedded with LC Font technology, which

was developed by SHARP Corporation for clearly
displaying easy-to-read characters on LCD screens.

Introduction (Continue)

ENG 4-2

Page 1 of 1

sharp operation manual

2020/3/25

file:///E:/hejiaye/html/B123389-00_EN-FR-ES/Base%20data/HTML/eng/4-2.html?next

Summary of Contents for Aquous 4T-B70CJ1U





































































































Search results

Summary of Contents for Aquous 4T-B70CJ1U

Reviews:

Related manuals for Aquous 4T-B70CJ1U

Brands by name

Popular brands

Sharp Aquous 4T-B70CJ1U, Operation Manual

Search results

Summary of Contents for Aquous 4T-B70CJ1U

Reviews:

Related manuals for Aquous 4T-B70CJ1U

Brands by name

Popular brands