Sharp Aquos LC-80LE642U, Operation Manual

Page: 48 / 56

46
Removing the Stand
• Before detaching (or attaching) the stand, make sure to turn off the TV and unplug the AC cord.
CAUTION
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
1
Unfasten the four screws used to secure the
stand in place.
2
Detach the stand from the TV.
NOTE
• Be sure to always carry the TV by three people holding
it with two hands.
Appendix
• In the installation procedure, be careful not to catch your fingers between the
TV set and the floor.
Wall Mount Kit Specifications
Standard dimensions for wall mount kits are shown below.
3 5 /
32
(80)
47 /
64
(18.3)
Min
6
57
/
64
(175)
Max
TV 凸
21
/ 64
(8.1)
TV
凸
14
49
/
64
(375)
Max
13 25 /
64
(340) Max
1
37
/
64
(40)
Max
WALL MOUNT KIT
WALL MOUNT KIT * 1
WALL
15
3
/ 4
(400)
7
7
/ 8
(200)
23
5
/
8
(600)
A
B
DEPTH OF
MOUNTING HOLES
SCREW
WALL MOUNT
UNIT
MOUNTING
HOLES
CABINET
31
/
64
(12)
For the screws, refer to the table shown below.
• VESA screw hole specs (A - B)
in millimeters
• Standard screw
• Quantity
23 5 /
8
- 15 3 /
4
(600 - 400)
M8* 2
4
*1 Must be smaller than the shaded area.
*2 Use 1.25 pitch screws.
NOTE
• Do not mount the TV at a tilt.
• To use this TV mounted on a wall, remove the cable tie as needed.
• Do not use screws that do not comply with the VESA standard screw specifications.
• Do not use screws that are longer than the standard length. Screws that are too long may cause damage to
the inside of the TV.
• Do not fasten the screws too firmly or loosely. This may damage the product or cause the product to fall,
leading to personal injury. SHARP is not liable for these kinds of accidents.
• SHARP is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.
Setting the TV on the Wall
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the product.
We recommend you to contact a technician for assistance when installing it.
SHARP is not responsible for any damage to the product or injury to yourself or others if you elect to install
the wall mount on your own.
CAUTION
• Install your wall mount on a solid wall perpendicular to the floor.
When you want to attach the wall mount to surfaces other than plaster board, please contact your
nearest retailer/adviser for additional information. If you install the TV on a ceiling or slanted wall, it may
fall and result in severe personal injury. Always have two people mount the TV on a wall.
Do not install the wall mount kit while your TV is
turned on. It may result in personal injury due to
electric shock.